Product details for Ionic-Pulser® PRO3 - Electrolysis Device
The Ionic-Pulser PRO3 electrolyzer enables the easy production of colloidal silver. The silver output remains the same regardless of the water quality and is proportional to the production time.
The main difference between the PRO3-electrolyzer and the Standard S is that the PRO3 comes with 3 marked contact sockets which allow for variable production time simply by switching the electrodes to different sockets. A longer production time results in a slower increase in electrical current which slightly increases the number of effective silver ions. Furthermore the 3 contact sockets help to avoid bridging between the electrodes, wiping the electrodes is not necessary and it overall slightly improves the quality of the solutions. Only 1 gold electrode is required for the production of colloidal gold. In that case the task of the cathode is performed by a stainless steel electrode, this method can also be used for other metals.
Thanks to the integrated, intelligent electronics, colloidal solutions with up to 100 mg/l of silver can be produced and reproduced regardless of the temperature, conductivity and quality of the water. The device is therefore particularly suited for distilled water with low conductivity while still producing high-quality colloidal silver.
The special power supply unit with an output of 30 V and the integrated electronics, which supply the electrodes with approximately 50-58 V, ensure optimal performance. The use of mechanical components such as digital displays or switches has been deliberately avoided to ensure a long service life for the device alongside the synthetic resin seal on the electronics.
The electronic DC switching power supply enables use in power grids from 100 to 240 V and does not require a transformer in countries with 110 V power grids. Silver electrodes are included with the device so no additional purchases are required. Distilled demineralized water that has been pre-heated should be used.
Properties of Ionic-Pulser Standard S Electrolyzer
- produce colloidal silver yourself
- easy to use
- precise silver production with less than 10% deviation
- no additional purchases required
- dimensions: 12.80 x 4.70 x 2.70 cm
- Weight: 0.19 kg
- includes DC switching power supply, 2 silver electrodes, 1 storage tube for electrodes and instruction manual
EN
DE
